ZURICH, Switzerland (RUAG Space PR) — RUAG Space, a leading supplier to the space industry, has successfully developed and tested a new low shock jettison system for payload fairings. This enables a quieter and smoother journey to space for satellites or other payload.
The required payload fairings for the European launchers Ariane and VEGA have been produced by RUAG Space in Emmen, Switzerland, since the 1970s. As part of the Future Launchers Preparatory Programme (FLPP) of the European Space Agency (ESA),
RUAG Space has developed this new separation and jettison system for payload fairings. “This new solution enables a quieter journey to space”, says Peter Guggenbach, CEO RUAG Space.
More comfort thanks to low shock load
The payload fairing protects the satellite from aerodynamic and thermal loads during flight. After passing through dense atmospheric layers and as soon as the satellite is no longer at risk, the payload fairing is separated from the launch vehicle.
As a rule, two pyrotechnic mechanisms are fired to open hinges, allowing the half-shells to separate safely from the payload. “Pyrotechnics is a proven technology, which may generate significant shock during activation and may result in excitation that needs to be considered in the design of the launcher and payload hardware”, says Alberto Sánchez Cebrian, Project Manager at RUAG.
Lower development costs and simpler test conditions
The separation and jettison system has a modular design and reduces development costs, as parts can be improved or replaced without affecting the entire system. Testing is easier and the mechanism does not require synchronization. The tests were carried out at the RUAG Spaces site in Emmen on a 2.6 m Vega payload fairing. The new system is scalable and could also be used for, for instance, in the European launch vehicle Ariane.
In addition to the successful separation test, a significant noise reduction was achieved. An integrated sound-reducing perforated insulation layer within the sandwich panels of the payload fairing enables noise reduction without increasing mass and volume. In certain frequency bands this system could replace acoustic absorber mats currently used in payload fairings. Testing and evaluation of this new system will continue in the next phase of the project.
About RUAG Space
RUAG Space is the leading supplier to the space industry in Europe, with a growing presence in the United States. With more than 1,300 staff across six countries, it develops and manufactures products for satellites and launch vehicles – playing a key role both in the institutional and commercial space market.
RUAG Space is a division of the international technology Group RUAG. RUAG develops and markets internationally sought-after technology applications in the fields of aerospace and defense for use on land, in the air and in space. RUAG generates sales of approximately CHF 2 billion and has over 9,100 employees – 400 of whom are trainees.