HAMPTON, Va. (NASA PR) — Engineers and technicians at NASA’s Langley Research Center in Hampton, Virginia, are hard at work assembling components for the Mars Entry, Descent, and Landing Instrumentation 2 (MEDLI2) which will collect data during the Mars 2020 mission’s entry through the Red Planet’s atmosphere.
These flight cable harnesses are 30-foot-long groups of electrical wires that will transmit signals for some MEDLI2 sensors. It takes about eight weeks to build and test all of the harnesses. Once complete, they will ship to Lockheed Martin for integration onto the Mars 2020 heat shield.
MEDLI2 will measure pressure, temperature, heat flux and radiation on the capsule that encloses the Mars 2020 rover during Mars atmospheric entry. The data collected will extend the groundbreaking entry data collected by the first MEDLI instrument suite flown aboard the Mars Science Laboratory mission in 2012 and will improve designs of entry systems for future robotic and human missions to Mars, Venus, Titan and the gas giants.
MEDLI2 is a Game Changing Development project led by NASA’s Space Technology Mission Directorate with support from the Human Exploration and Operations Mission Directorate and the Science Mission Directorate. The project is managed at Langley and implemented in partnership with NASA’s Ames Research Center in California’s Silicon Valley and the Jet Propulsion Laboratory in Pasadena, California. JPL manages the Mars 2020 spacecraft development for the Science Mission Directorate at NASA Headquarters in Washington.