zero2infinity Flies Microbloon to 32 Kilometers

Microbloon in flight. (Credit: zero2infinity)

León, Spain, November 12, 2012 (zero2infinity PR) —Barcelona-based company zero2infinity has successfully launched its newest prototype, the microbloon 2.0, to the edge of Space at almost 32km in altitude, that is, above 99% of the mass of the atmosphere.

It was a major step in zero2finfinity’s mission to bring Space closer to society. Founder José Mariano López-Urdiales said: “It’s very exciting to be this close to flying people on bloon. The environmental conditions inside the pod remained comfortable at all times. The efficiency of the aviation safety agencies (AENA, AESA), local governments and especially the Spanish Air Force was key for this success. When everyone works together, anything can be achieved in Spain.”

The microbloon 2.0, designed by zero2infinity, is 2 m in diameter and is a scale model of bloon, the commercial vehicle that is soon to take 4 passengers and 2 pilots to the edge of Space. On the flights, passengers will conduct scientific experiments at a fraction of the cost of other Space missions and enjoy the view of the curvature of the Earth through the pod’s panoramic windows during the 2 hours spent at an altitude of 36 km.

On Monday 12 November 2012 at 5am (GMT), the whole team was ready at the airport of Vírgen del Camino (León, Spain) to get all systems and equipment in flight position. At 12:15pm (GMT) inflation of the balloon started and at 1:10pm (GMT) the 43,000 cubic meter balloon was released and lifted the pod gently for an hour up to 31.8 km. As planned, the balloon initially flew south as it was ascending, then moved eastward during the 2 hours floating at 31.8 km, until it finally initiated a gentle descent with parachutes and landed in Encinas de Esgueva at 5:10pm (GMT), where the recovery team was waiting and recovered the pod and the balloon.

Over the next few months, all data from the sensors will be thoroughly scrutinized. The first results show that the temperature inside the pod remained above 15ºC throughout the flight, with 20% humidity. The pressure remained stable between 900 and 950mb, which is equivalent to the pressure experienced at 1000 m above sea-level. The trajectory prediction was flawless. The pilot was an android kindly provided by the robotics group of the University of León.

Steven Peterzén (The ISTAR GROUP) is the leading expert in stratospheric balloons who orchestrated the preparation, launch and recovery. The weather forecast and trajectories were calculated by Pierre Dedieu, a meteorologist with years of experience with CNES’s (the French Space Agency) high altitude balloon program. Back in the 90s, CNES were launching their balloons from the same air force base in León.